Linksys EG1032 v3 Instant Gigabit Desktop Network Adapter Driver

          Linksys, A Division of Cisco System, Inc.
=================================================================

    Install method:
    a. Power-off your PC and insert your adapter.
    b. Boot-up you Solaris/x86 and login as "root".
    c. Copy the "eg1032v3.zip" into the temporary location in your
       hard-driver.
    d. UNZIP the "eg1032v3.zip" and you will get 2 files, "egv3" and
      "Install.sh".
    e. Add hostname for your adapter into /etc/hosts file
    f. Run the "./Install.sh" from Console to install the driver
    	#./Install.sh
    	#devfsadm -i egv3 (for solaris7, use drvconfig and reboot with r )
    g. Configure the network interface. Create and/or modify the following file:
        /etc/hostname.egv3N
    h. Reboot the system.
        # init 6
    i. it will modify 2 files, "/etc/name_to_major" and "/etc/driver_aliases"
    j. You can execute "ifconfig -a" to make sure the RTL8139 driver is up.