Revision History 786C1 ROM Family Models Supported: HP Compaq Business Desktop dc7100 Convertible Minitower HP Compaq Business Desktop dc7100 Small Form Factor HP Compaq Business Desktop dc7100 Ultra-slim Desktop HP Compaq Business Desktop dx6100 Microtower HP Compaq Business Desktop dx6100 Slimtower Version 2.15 - Improves the security of pre-boot authentication (BIOS-based) passwords by clearing data from volatile memory. Version 2.14 - For HP Compaq Business Desktop dc7100 Convertible Minitower, HP Compaq Business Desktop dc7100 Small Form Factor, and HP Compaq Business Desktop dc7100 Ultra Slim models, this SoftPaq, BIOS Version 2.14, is a web and factory release for Intel 600 Series processors. For HP Compaq Business Desktop dx6100 Microtower and HP Compaq Business Desktop dx6100 Slimtower models, BIOS Version 2.14 is a new factory release that will be shipped on new models, replacing BIOS version 1.57 in the factory. - Adds EIST runtime power management support for Intel 600 Series Processors. - Adds L2 Cache size of 2 MB to support Intel 600 Series Processors. - Adds microcode update for Intel E0, D0, and N0 stepping processors (F34, F41, and F43). - Adds support for Intel Vanderpool Technology (VT). Version 1.59 - For HP Compaq Business Desktop dc7100 Ultra-Slim Desktop models, BIOS version 1.59 is the initial shipping BIOS. Version 1.57 - For HP Compaq Business Desktop dc7100 Convertible Minitower and HP Compaq Business Desktop dc7100 Small Form Factor models, BIOS Version 1.57 is a web and factory release. It will replace BIOS Version 1.05 in the factory only for PCI Express NVIDIA Quatro 280NVS 64 MFH models. For HP Compaq Business Desktop dx6100 Microtower and HP Compaq Business Desktop dx6100 Slimtower models, BIOS Version 1.57 is a new factory release that will be shipped on new models, replacing BIOS version 1.06 in the factory. - Adds microcode update for Intel E0 and D0 stepping processors (F34 and F41). - Updates Intel Memory Reference Code to version 1.40. - Adds thermal support for Small Form Factor platform. - Applies Intel fix for an issue with Samsung DDR1 DIMM. Version 1.53 - Initial BIOS version for HP Compaq Business Desktop dc7100 Ultra-slim Desktop. Web release only for HP Compaq Business Desktop dc7100 Convertible Minitower & HP Compaq Business Desktop dc7100 Small Form Factor. Factory and Web Release for HP Compaq Business Desktop dx6100 Microtower & HP Compaq Business Desktop dx6100 Slimtower - Corrects an issue with Replicated Setup that caused an incorrect number of cylinders to be used when a hard drive was being reconfigured for User Translation mode. - Corrects an issue that prevented access to a MultiBay hard drive after the operating system resumed from Standby (S3) mode if Drivelock was enabled on the drive and the Master password was used to unlock the drive during the previous startup. - Corrects an issue with the MultiBay option that prevented the cover sensor from reporting the cover removal warning when the desktop is in the Soft Power Off (S5) state. - Prevents non-critical errors generated by some PCI Express graphics cards from causing the system to stop responding (hang). - Extends Drivelock support to all hard drives that support the ATA Security Command set. - Modifies the diskette interrupt 13h "Get Media Type" service to correctly indicate whether the detected media type is the default for the drive. - Adds support for PCI Express x1 video adapters. Version 1.06 - Initial BIOS Version for HP Compaq Business Desktop dx6100 Microtower & HP Compaq Business Desktop dx6100 Slimtower. Version 1.05 - Initial BIOS Version for HP Compaq Business Desktop dc7100 Convertible Minitower & HP Compaq Business Desktop dc7100 Small Form Factor.