Emergency Disks 
Copyright (c) 2003 Symantec Corporation
All rights reserved

Please read this document carefully; it contains important
information about Emergency Disks.

********************************************************************** 

Emergency disks allow you to start your computer in DOS. Use Emergency 
Disks to solve problems before you install.

NOTE: It is always better to use Rescue Disks made on the problem 
machine if you have them. Rescue Disks contain machine-specific 
information and can solve problems easier than Emergency disks. 

Make Emergency Disks from the Support folder of the product CD. You
will need several formatted 1.44 MB disks. You will need one disk for
each .IMG file in this folder.


********************************************************************** 

To make Emergency Disks
=======================
CAUTION: Perform the following procedure on a different computer from 
the one with the problem. Executing these steps might cause additional 
problems.

1. Insert the product CD into the CD-ROM drive. 
2. Click Browse the CD.
3. Double-click the Support folder.
4. Double-click the Edisk folder.
5. Double-click Ned.exe
6. Follow the on-screen instructions.

To use the Emergency Disks:
===========================
1. If your computer is running, click the Start button, select Shut 
   Down, and then select the Shut Down option. When Windows has shut 
   down, switch off your computer using the power switch.

2. Insert Emergency Disk 1 in your floppy drive, and then switch on 
   your computer.

3. Follow the on-screen instructions.

**********************************************************************