Back to Contents Page

Modem

Dell™ XPS™ M1210 Service Manual

  Removing the Modem

  Replacing the Modem


Removing the Modem

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer.
  1. Follow the instructions in Before Working Inside Your Computer.

  2. Remove the hinge cover (see Removing the Hinge Cover).

  3. Remove the keyboard (see Keyboard).

  4. Remove the display assembly (see Removing the Display Assembly).

  5. Remove the palm rest (see Removing the Palm Rest).

  6. Remove the M2 x 3-mm screw that attaches the modem to the system board.

  7. Pull up on the pull-tab to disconnect the modem from the system board connector .

1

modem

2

pull-tab

3

system board connector

4

M2 x 3-mm screw

5

modem cable

 

 

NOTICE: Do not disconnect the modem cable from the system board.
  1. Disconnect the modem cable from the modem.

Replacing the Modem

  1. Connect the modem cable to the modem.

NOTICE: Ensure that the modem cable is routed correctly when you replace the modem.
  1. Connect the modem to the system board.

Align the connector on the bottom of the modem with the modem connector on the system board, and press down on the end of the modem labeled "PRESS HERE."

  1. Replace the M2 x 3-mm screw.

Back to Contents Page